Precautions when using torque sensor

Torque sensors are widely used in industrial applications, such as manufacturing viscometers, electric, pneumatic, hydraulic torque wrenches, etc. It has the advantages of high precision, fast frequency response, good reliability, and long life. It is a common sensor in sensors. And there are also applications in the field of automobiles. So what are the precautions for the use of torque sensors? The following Changqing editor will introduce to you.

​​

    Precautions when using the torque sensor:

1. When installing the line of the sensor, it should be noted that the output of the signal line cannot be short-circuited to the ground, and the power line should not be short-circuited. In addition, the current output of the sensor will not be higher than 10MA, and in order to ensure the normal operation of the equipment, The shielding layer of the shielded cable needs to be connected to the common terminal of the 15V power supply.

2. For the torque sensor, the coupling is an important part, so protective facilities such as protective cover should be added outside. In addition, the fastening bolts of the torque sensor should be tightened, so as to ensure the normal operation of the sensor. When the fastening bolts of the coupling are found to be loose, they should be tightened as soon as possible.

3. Because the interior of the sensor is relatively precise, it should be used in a dust-free environment as much as possible. If too much dust enters the sensor, it will also affect the operation and measurement accuracy of the equipment. Power should be cut off after work.

4. For the precautions when using the torque sensor, first of all, even if it is installed in strict accordance with the supporting instructions, and it cannot be operated with electricity during installation, it may damage the sensor, and the installation should refer to the manual. In order to ensure that the sensor can convert the torque change accurately into the electrical signal, it should be debugge